1/ Prioritize preparation: Ensure a flawless splicer by placing the sleeve over a fiber before stripping it.
2/ Maximize efficiency: Strip fibers simultaneously with the SS05 stripper. Strip two 250 µm fibers simultaneously for unrivalled efficiency.
3/ Clean properly: Impeccable fiber cleanliness is essential for optimum soldering quality. Use lint-free wipes and isopropyl alcohol. If you hear the fiber “sing”, this indicates that the cleaning has been well done.
4/ Strip faster: Discover the efficiency of the new AD-16A fiber adapter for your CT50 clipper. Thanks to its double grooves, you can clip two fibers at a time, considerably reducing the time needed for preparation.
5/ Effortless fiber placement: the 45S's new fiber support mechanism automatically closes the clamps when placing fibers, eliminating the need to use both hands to place each fiber.
6/ Faster fiber movement: Because the 45S's windscreen and fiber supports are linked, when the windscreen opens, the fiber supports open too, making it easier to handle the fibers and speeding up their movement to the oven.
7/ Secure and protect: Slide the sleeve along the fiber to protect the splice and use the oven, which heats up 15% faster, to protect the splice.
Summary:
The FUJIKURA 45S splicer offers speed, efficiency and precision. Here are its strengths:
- Effortlessly prepare two fibers at the same time, helping to reduce total operation time by 30%.
- Place the fibers in the machine with just one hand, thanks to the 45S's automated mechanism.
- Each splice is optimized by active fusion control technology, guaranteeing stable and consistent results, with low losses and high-quality splice.
- Take advantage of a 15% faster furnace to protect your splices in record time.
In this article, we've revealed the 7 essential steps to mastering the 45S and making impeccable splices every time. From fiber preparation to final heat-shrinking, you can now take full advantage of the capabilities of this small but mighty splcier.