New products
DuctRod Machine
Designed to push a duct rod into an underground duct. It is equipped with a flexible clamping unit, allowing you to attach the machine to the sidewall of the manhole securing more stable installation.
Fiber/Cable OD: 9-25 mm
Duct size OD: 10-40 mm
Preparation time: 2-4 min
Blowing distance (with air): Up to 500 m
Sticklers™ Pro360°™ Touchless Connector Cleaner
The Sticklers™ Pro360°™ Touchless Cleaner is the future of high-performance fiber optic end face cleaning. Unlike anything else in the industry, this groundbreaking end face connector cleaning tool stands out for its ability to quickly and completely clean oils and dust across the entire end face of both male and female connector ends, with just the press of the connector cleaner handset.
- Contactless 360° Clean Full End Face Cleaning
- Cleans to the Ferrule Edge for Complete Cleaning
- Small and Portable Enough to Go Anywhere
- Multiple Size Adapters for Cleaning Flexibility
- Replaceable Cleaning Fluid Cartridge = 2,100 Cleans
Sticklers Fiber Optic Cleaning Kit | MCC-FK03
Sticklers MCC-FK03 comprehensive fiber optic cleaning kit
- 2 alcohol sprays MCC-POC03M
- 2 boxes of 90 fiber optic wipes MCC-WFW
- 1 pack of 25 wipes pre-soaked in isopropyl alcohol
- 1 box containing 50 cleaning sticks for 2.5 mm and 1.25 mm connectors MCC-VS
- 1 flexible and practical carry case
- and as a gift: one Sticklers torch!
A comprehensive fiber optic cable and connector cleaning kit containing the basic field requirements.
Price
€110.00
Sticklers cleaning fluid spray | MCC-POC03M
Sticklers MCC-POC03M cleaning fluid spray
- contains 90 ml
- Dual-use: alcohol dispenser for wipes or precision spray
- Practical and clever with its precision rod
- Approved for air transport
This cleaning fluid spray can be used in two different ways: as an alcohol dispenser with fibre optic wipes or for precision cleaning for hard to access areas with its plastic rod.
Price
€21.00
Sticklers Box Of Lint-Free Wipes | MCC-WFW
Sticklers MCC-WFW box of lint-free wipes for fibre optic connectors
- Box of 90 wipes
- Dispensing system
- Compact and practical design for the field
Transport your lint-free fiber optic cleaning wipes easily thanks to this practical case fitted with a dispenser.
Price
€8.50
PowerFlow Blowing machine
Of all fiber blowing machines, this cable and fiber blowing machine is very strong.
It is built and designed for rough conditions and for blowing in a huge variety of cables, fibers and ducts.
- Compatible with 8 to 25 mm cable diameter
- Duct diameter 18 to 70 mm
- Blowing speed up to 80 m/min
- Can blow with air and water
- Robust design
And do not forget! The PowerFlow is still easy to handle and operate.
MultiFlow RAPID Blowing Machine
MultiFlow RAPID is designed for relining of multiple micro ducts, but it can also be operated for single cables.
Fiber/Cable OD: 5.5-32 mm
Duct size OD: 10-63 mm
Preparation time: 8-10 min
Blowing distance: Up to 5,000 m
Floating distance with water: Up to 10,000 m
Blowing speed: Up to 80 m/min
Robust design
MiniFlow Rapid Blowing machine
MiniFlow Rapid blowing machine is designed to answer to the FTTH networks indoor and outdoor deployment needs.
- Compatible with 3 to 12 mm cable diameter
- Duct diameter 7 to 20 mm
- Preparation time: 4 min
- Blowing distance (with air): Up to 3500 m
- Blowing speed up to 100 m/min
- Follow up of speed and cable length
- Display of cable propulsion strength
- Compact design
Nanoflow MAX
Nanowflow MAX fiber blowing machine is designed to answer the FTTH network needs
- Compatible with 0,8 to 4,5mm cable diameter
- Micro duct diameter 3 to 12,7 mm
- Preparation time : 3 min
- Blowing distance : Up to 1 200m
- Blowing speed up to 125m/min
- Electronic meter speed/counter with blowing distance
- Electronic protection technology to prevent damages to fiber cable
MicroFlow LOG blowing machine
MicroFlow LOG fiber blowing machine is designed to answer the FTTH network needs
- Compatible with 0,8 to 6,5mm cable diameter
- Micro duct diameter 4 to 16mm
- Preparation time : 5 min
- Blowing distance : Upd to 2 500m
- Blowing speed up to 90m/min
- Electronic control unit
- Electronic meter speed/counter with presetting of blowing distance
- Adjustable motor torque load of fiber cable
- Electronic protection technology to prevent damages to fiber cable
Hydraulic MultiPower Pack
Hydraulic driven fiber blowing machines are more effective and have a significantly lower total cost of ownership compared to an airdriven machine.
MicroFlow Touch blowing machine
MicroFlow Touch fiber blowing machine is designed to answer the FTTH network needs
- Compatible with 0,8 to 6,5mm cable diameter
- Micro duct diameter 4 to 16mm
- Preparation time : 5 min
- Blowing distance : Upd to 2 500m
- Blowing speed up to 90m/min
- Electronic control unit
- Electronic meter speed/counter with presetting of blowing distance
- Adjustable motor torque load of fiber cable
- Electronic protection technology to prevent damages to fiber cable